RX3 Jumbo Rack 2′ Depth 8′ Width

Full order ships on 01/31/2025 – Want to reserve inventory but not ready to pay in full yet? You can put down a 30% deposit to reserve inventory for this rack + other items on your order. The remaining 70% to be paid on 01/31/2025. Use discount code: 30DOWN (applicable to purchasers using credit card or PayPal payment methods. Affirm is excluded).

The RX3 Jumbo Rack 2′ Depth 8′ Width provides you with a full gym setup with a half rack, 2x cable tower 3000s with ability to do both 1:1 and 2:1 weight ratios, and options for built-in storage. This Jumbo Rack setup offers a great chest stretch by utilizing 1 handle from each cable tower when doing cable crossover movements.

RX3 SERIES DESIGN ETHOS

HEAVY DUTY STEEL WITH MODULAR DESIGN

Lift confidently and safely from 3″ x 3″ 11-gauge steel with 1400+ LB weight capacity. Our fully modular
design features offset, 1″ holes with 2″ spacing on all 4 sides

DURABLE COATINGS AND HARDWARE

Our 1″ hardware is coated with black e-coat which is more resistant to corrosion, more durable, and looks
very sleek because who doesn’t love black hardware?
All attachments and hardware utilize 1″ pins at 2″ spacing to create a fully modular and extremely
versatile rack.

EFFICIENT ACCESSORY MOUNTING

Laser-cut numbering for each of our offset 1″ holes with 2″ spacing on uprights, cross bars, and
accessories such as spotter arms, provides convenience.

Attachment Design

All RX3 attachments are made with a rounded chrome pin making insertion into the uprights easy and
frictionless. The rounded chrome pin as well as the uprights will maintain their new appearance, even
after years of repeatedly inserting and removing attachments. Other companies use a powder-coated pin
that scratches and chips away on both the pin itself as well as the coating on the upright. Further, the
inside of all RX3 attachments are lined with protective padding made from durable materials to prevent
metal-to-metal contact.

HIGH-QUALITY FINISHES & DETAILS

Chrome uprights where trolleys are used means less wear and scratches to your upright as you adjust the
position of the trolley up and down. Our plate sleeves are also chrome with a rubber stopper which
eliminates the potential of scratches and chips seen on cheaper, powder-coated plate sleeves. RX3
Sandwich J-Cups feature stainless steel logo plates with an oversized racking area, making it easier for
lifters to re-rack their barbell into the intended racking area. All components and attachments were
designed in more detail.

Exceptional Construction

Logos are bolted on with stainless steel nameplates on 95% of attachments, while a few are laser-cut. No
stickers are used in any of our RX3 designs. Take a look at our Stainless Steel Logo Plate — we’ve gone
the extra mile by laser-cutting triangular designs into the nameplate, further enhancing its standout
appearance that is representative of the pinnacle of quality seen on the RX3 series.

In-House Precision Manufacturing

We’ve upgraded our manufacturing and the first thing we wanted to offer is the RX3 line. 6-Axis Laser
cutting, CNC Lathe, robotic welding, friction welding, hydraulic servo bending, shot blasting, and
powder coating all in the same facility for a consistent and high-quality product. We’ve even brought in
a hardware packing machine to blister pack all hardware in-house.

Continuing Innovation

We didn’t stop at designing just high quality standard attachments like j-cups and spotter arms; our
cable trolley systems are the best in the market. Starting with our RX3 3000 Single Column Functional
Trainer series which features dual trolleys on a single column to allow 2:1 or 1:1 weight ratios as well
as our upcoming patent-pending Tornado Pivot Arm which will allow even more functional training
capabilities in one unit. Both cable machines also include 2x black, aluminum anodized, knurled handles
that are the best standard handles we’ve seen in the industry.

FAQs

Who is this unit for?
The RX3 Jumbo Rack 2′ Depth 8′ Width offers a complete gym setup with a half rack, 2x cable towers spaced enough
apart for cable crossovers, and built-in storage options all in one space-saving unit. If you looked at our RX3
freestanding rack 3000 option and wanted something with a bit more stretch for cable crossovers, the
ability to
have more than 1 person using the half rack and cable towers at the same time, or you wanted to be able to use
the squat rack without needing to adjust various attachments you might have placed on the cable towers, then
this is for you.

What’s the benefit of this RX3 Jumbo Rack 2′ Depth 8′ Width over others?
There’s a lot of reasons why our RX3 series should be your top choice:

1. The 3000 series cable towers on the left and right sides offer the ability to do both 2:1 and 1:1 weight
   ratios. The 2:1 weight ratios are the most commonly used, suitable for dynamic and more functional movements
   where you want a lower starting weight of 10LBs and the ability to increase weight in 5LB increments. You
   generally want to work your way up to heavier weights by increasing in 5LB increments for exercises such as
   chest fly, face pulls, and basically anything else where you use 1 hand or 1 leg. Jumping in 10LB increments
   might be too heavy for most movements and cause you to break proper form. On the other hand, the dual 200LB
   weight stacks can be utilized to their full 200LBs by changing to 1:1 weight ratio. Exercises such as lat
   pulldowns and low rows may need weight in excess of 100LBs and the ability to utilize the 200LB weight
   stacks to actually feel like 200LBs comes in handy by the 3000 cable towers ability to change to 1:1 weight
   ratio.
2. The configuration of our jumbo rack allows you to use a flat bench, incline bench, or decline bench off of
   the
   front uprights of the half rack. You will have ample space to put your bench into the rack area, regardless
   if
   you have storage shelves installed in the center or not.
3. The distance from back uprights to front uprights for the 2x 3000 cable towers and the half rack are exactly
   the
   same. This is the most optimal design for space efficiency and allows cable crossover movements without the
   need
   to fold your half rack. Simply stand in front of the half rack and be in perfect position to utilize both
   cable
   towers for any cable crossover movement. This would also allow greater attachment options in the future as
   you’d
   be able to utilize attachments that span in between 2 uprights by using the half rack upright and the 3000
   cable
   tower 3000 upright.
4. The footprint of this jumbo rack is one of the smallest, while still delivering all the functionality of
   others.
   At only 105 inches (8’9″) long x 31 inches (2’7″) deep, you get everything you need in a more
   space-efficient
   footprint.
5. We also offer unparalled quality and attention to detail throughout the RX3 series. The uprights where the
   trolley slides are done in chrome to reduce friction, reduce wear and tear from the trolley and aluminum pop
   pin, and more rust resistant. Our attachment pins such as j-cups and spotter arms also feature a rounded
   chrome
   pin that eliminates powder coat chipping from the pin and the upright. We’re only using high-quality
   aluminum
   pulleys throughout, and include black anodized aluminum handles with the 3000 cable towers. All hardware is
   black e-coat which looks super sleek and is more scratch and corrosion resistant.

Do I need to bolt this into the ground?

The jumbo rack does not need to be bolted into the ground, but we always recommend doing so for additional
safety and liability

What other attachments are available?
This unit is 3″x3″ with 1″ holes and 2″ spacing, so there’s are a wide variety of attachments from us and
others
available for this specification. We’re currently offer free shipping on this unit plus any added
accessories
you order with it by selecting the $0 cost fedex shipping option.
We recommend using the following attachments: spotter
arms, lat pull down seat, adjustable foot plate, FT Cable Output Adapter.

For storage options built into the rack, we recommend:
– up to 8x plate sleeves
– up to 4 total shelves consisting of either RX3 43″ Plate
and Ball Shelf or RX3 43″
Kettlebell and Dumbell Shelf.

Our design team meets biweekly and are currently working on a broad range of attachments which will be added here as we
develop
more and more.

How do I add 2.5LB increments or add more weight to the 200LB stack?
You can utilize our Weight
Stack Plate Load Pin, a 2.5LB attachment that inserts into the weight stack and
allows
you to increase weight by 2.5LBs (with 1:1 weight ratio) or 1.25LBs (with 2:1 weight ratio) as well as add
more
weight to the 200LB stack.

RX3 3000 SPECS
BENEFITS OF THE RX3 3000 SERIES	3″ x 3″ tubing with 1″ pin holes for a wide variety of attachment options Weight Range: Start at 10 LBS with 5 LB increments (single handle) all the way up to 200 LBS (dual handle) Less Wear: Chrome uprights and aluminum pulleys Convenience: Aluminum Anodized pop pin with a stainless Steel knurled handle on trolley makes adjustments easy
WEIGHT RATIO	1:1 with dual handle, 2:1 with single handle
STARTING WEIGHT PER SINGLE HANDLE	10 LBS with 5 LB increments
STARTING WEIGHT PER DUAL HANDLE	20 LBS with 10 LB increments
WEIGHT STACK	200 LBS
Cable Travel (single handle from 1 column)	100″
Cable Travel (double handle from 1 column)	50″
TOTAL TROLLEY POSITIONS	33 positions spaced 2″ apart
TROLLEY LOWEST ADJUSTMENT POINT	13″
TROLLEY HIGHEST ADJUSTMENT POINT	78″
TROLLEY SPACING	2″
CABLE MATERIAL	Aircraft grade nylon cables
Trainer Handles	Black, aluminum anodized handles with knurling
PULLEYS	Aluminum
HARDWARE	Black, e-coat 1″ hardware

What’s Included

• 6x RX3 Black 92″ Upright
• 2x RX3 Chrome 92″ Upright
• 12x RX3 26″ Black Crossbar
• 2x RX3 Cable Tower 3000 Attachment (without cable)
• 2x 26″ Crossbar Cables for RX3 Cable Tower 3000
• 1x RX3 42″ Black Crossbar
• 1x RX3 Logo Plate for Cross Bar
• 1x RX3 42″ Pull Up Bar
• 2x RX3 J-Cups