RX3 3000 Smith Machine Rack

Full order ships on 01/28/2025 – Want to reserve inventory but not ready to pay in full yet? You can put down a 30% deposit to reserve inventory for this rack + other items on your order. The remaining 70% to be paid on 01/28/2025. Use discount code: 30DOWN (applicable to purchasers using credit card or PayPal payment methods. Affirm is excluded).

The RX3 3000 Smith Machine Rack is the perfect all-in-one Rack for a functional trainer, smith machine, and a half rack in one unit. It features the ability for both 2:1 and 1:1 weight ratios per upright, which allows you to start at a lower starting weight, increase in 5LB increments, and utilize the full 2x 200LB stack per side. We’re also including a smith machine that further allows you to isolate targeted muscles while keeping safety and simplicity in mind. 2 Included RX3 J-Cups allows the front uprights to be used as a half rack with your barbell. It’s made with 3″x3″ uprights, 11-gauge steel, and 1″ holes in order to allow the greatest number of attachment options and offer a fully modular setup

RX3 SERIES DESIGN ETHOS

HEAVY DUTY STEEL WITH MODULAR DESIGN

Lift confidently and safely from 3″ x 3″ 11-gauge steel with 1400+ LB weight capacity. Our fully modular
design features offset, 1″ holes with 2″ spacing on all 4 sides

DURABLE COATINGS AND HARDWARE

Our 1″ hardware is coated with black e-coat which is more resistant to corrosion, more durable, and looks
very sleek because who doesn’t love black hardware?
All attachments and hardware utilize 1″ pins at 2″ spacing to create a fully modular and extremely
versatile rack.

EFFICIENT ACCESSORY MOUNTING

Laser-cut numbering for each of our offset 1″ holes with 2″ spacing on uprights, cross bars, and
accessories such as spotter arms, provides convenience.

Attachment Design

All RX3 attachments are made with a beveled chrome pin making insertion into the uprights easy and
frictionless. The beveled chrome pin as well as the uprights will maintain their new appearance, even
after years of repeatedly inserting and removing attachments. Other companies use a powder-coated pin
that scratches and chips away on both the pin itself as well as the coating on the upright. Further, the
inside of all RX3 attachments are lined with protective padding made from durable materials to prevent
metal-to-metal contact.

HIGH-QUALITY FINISHES & DETAILS

Chrome uprights where trolleys are used means less wear and scratches to your upright as you adjust the
position of the trolley up and down. Our plate sleeves are also chrome with a rubber stopper which
eliminates the potential of scratches and chips seen on cheaper, powder-coated plate sleeves. RX3
Sandwich J-Cups feature stainless steel logo plates with an oversized racking area, making it easier for
lifters to re-rack their barbell into the intended racking area. All components and attachments were
designed in more detail.

Exceptional Construction

Logos are bolted on with stainless steel nameplates on 95% of attachments, while a few are laser-cut. No
stickers are used in any of our RX3 designs. Take a look at our Stainless Steel Logo Plate — we’ve gone
the extra mile by laser-cutting triangular designs into the nameplate, further enhancing its standout
appearance that is representative of the pinnacle of quality seen on the RX3 series.

In-House Precision Manufacturing

We’ve upgraded our manufacturing and the first thing we wanted to offer is the RX3 line. 6-Axis Laser
cutting, CNC Lathe, robotic welding, friction welding, hydraulic servo bending, shot blasting, and
powder coating all in the same facility for a consistent and high-quality product. We’ve even brought in
a hardware packing machine to blister pack all hardware in-house.

Continuing Innovation

We didn’t stop at designing just high quality standard attachments like j-cups and spotter arms; our
cable trolley systems are the best in the market. Starting with our RX3 3000 Single Column Functional
Trainer series which features dual trolleys on a single column to allow 2:1 or 1:1 weight ratios as well
as our upcoming patent-pending Tornado Pivot Arm which will allow even more functional training
capabilities in one unit. Both cable machines also include 2x black, aluminum anodized, knurled handles
that are the best standard handles we’ve seen in the industry.

FAQs

Who is this unit for?
This unit is for those who want a lat pulldown, low row, and functional trainer that can also perform as a half
rack and smith machine with storage capabilities, all while being able to switch from 2:1 weight ratio to 1:1
weight ratio quickly on the cable system (Click
here for more information on pulley ratios). The 3″x3″ uprights
and crossbars also allows for extra modularity and attachment options from a larger ecosystem. Further, because
of our 93″ height, this unit is tall enough to accommodate a seated lat pulldown with full range of motion. The
2 handle design makes this unit extremely versatile as you can perform 1-handed exercises as well as 2-handed
exercises in one, space-saving unit. The included smith machine is not just for safety with its self-spotting
capabilities, it’s also an excellent tool for totally fatiguing muscles from only one angle, thus tapping into
the same set of motor units on every rep without fail. Without needing to engage multiple muscle groups to
maintain balance and posture like with free weights, you can push more weight while focused on growing a
specific targeted muscle. 2 front posts with j-cups included allows you to rack your barbell for benching and
squatting if you do want to train those stabilizer muscles with more freedom of movement.

What is the benefit of using 2 separate single column functional trainers to make a rack, where now you have 4
handles instead of 2 seen on other designs?
4 handle options gives you the ability to choose from doing 2:1 or 1:1 weight ratio per handle. Most racks
setups have only 1 handle on each side and are either a 2:1 ratio or 1:1 ratio that cannot be changed. For 2:1
ratio racks, you don’t have enough weight to do lat pulls, low rows, or belt squats from each upright. For 1:1
ratio racks, it’s too heavy to jump 10LBs per handle when doing chest flys and many other exercises, such as
cable Y raises or face pulls. You may also not have the needed cable travel since 1:1 cable travel is half the
distance of 2:1 ratio cable travel. With our design, you can switch from 1:1 ratio by using both handles on each
upright, as well as go to 2:1 ratio by just using 1 of the 2 handles on each upright.
Click
here for more information on pulley ratios

What is the benefit of a smith machine?
The RX3 Smith Machine allows you to prioritize safety, simplicity, gradual strength progression, and better
isolation of targeted muscles compared to free weights. The predictability of the bar’s path makes it an
excellent tool for breaking down and totally fatiguing muscles from one angle, thus tapping into the same set of
motor units on every rep without fail. Without needing to engage multiple muscle groups to maintain balance and
posture like with free weights, you can push more weight while focused on growing a specific targeted muscle.

Do I need to bolt this into the ground?
We always recommend doing so for additional safety and liability.

What other attachments are available?
This unit is 3″x3″ with 1″ holes and 2″ spacing, so there’s are a wide variety of attachments from us and others
available for this specification. We’re currently offering free shipping on this unit plus any added accessories
you order with it by selecting the $0 cost fedex shipping option. We recommend using the following attachments:
spotter arms, lat pull down seat, adjustable foot plate, FT Cable Output Adapter.

For storage options built into the rack, we recommend:
– Up to 8x plate sleeves
– Up to 4 total shelves consisting of either 42″ Plate and Ball
Shelf or 42″ Kettlebell and
Dumbbell Shelf.

Our design team meets biweekly and are currently working on a broad range of attachments which will be added here as we
develop more and more.

RX3 3000 SPECS
BENEFITS OF THE RX3 3000 SERIES	3″ x 3″ tubing with 1″ pin holes for a wide variety of attachment options Weight Range: 10 LBS starting weight with 5LB increments (single handle) all the way up to 200 LBS with dual handle Less Wear: Chrome uprights and aluminum pulleys Convenience: Aluminum Anodized pop pin with a stainless Steel knurled handle on trolley makes adjustments easy
WEIGHT RATIO	1:1 with dual handle, 2:1 with single handle
STARTING WEIGHT PER SINGLE HANDLE	10 LBS, then 5 LB increments
STARTING WEIGHT PER DUAL HANDLE	20 LBS, then 10 LB increments
WEIGHT STACK	200 LBS
CABLE TRAVEL (SINGLE HANDLE FROM 1 COLUMN)	100″
CABLE TRAVEL (DOUBLE HANDLE FROM 1 COLUMN)	50″
TOTAL TROLLEY POSITIONS	33 positions spaced 2″ apart
TROLLEY LOWEST ADJUSTMENT POINT	13″
TROLLEY HIGHEST ADJUSTMENT POINT	78″
TROLLEY SPACING	2″
CABLE MATERIAL	Aircraft grade nylon cables
TRAINER HANDLES	Black, aluminum anodized handles with knurling
PULLEYS	Aluminum
HARDWARE	Black, e-coat 1″ hardware
BENEFITS OF THE RX3 SMITH MACHINE	Prioritize safety, simplicity, gradual strength progression, and better isolation of targeted muscles 48LB 28mm chrome barbell with 13 inches of loadable plate sleeve Chrome safety hooks with chrome pins avoids any powder coat damage
WEIGHT	48 LBS
DIAMETER	28mm
LOADABLE PLATE SLEEVE	13 inches
BEARINGS	Needle Bearings

What’s Included

• 2x RX3 Black 92″ Upright
• 2x RX3 Chrome 92″ Upright
• 2x RX3 Cable Tower 3000 Attachment (without cable)
• 2x 42″ Crossbar Cables for RX3 Cable Tower
  3000 (set)
• 5x RX3 42″ Black Crossbar
• 1x RX3 Smith Machine
• 1x RX3 42″ Pull Up Bar
• 1x RX3 Logo Plate for Cross Bar
• 2x RX3 J-Cups